Skip to main content
Menu Menu

MEM20105 Certificate II in Engineering (Heavy Fabrication Pre-Apprenticeship)

MEM20105 Certificate II in Engineering (Heavy Fabrication Pre-Apprenticeship)

National ID MEM20105 State ID AA50
Kickstart you career in the engineering field

This qualification will provide you with practical skills and knowledge in a range of metals and engineering industry areas.

Image
Engineering and Mining

This course is part of the Lower fees, local skills initiative. From 1 January 2020 through to 31 December 2025 you'll only pay half the course fees, capped at $1,200; or $400 if you're aged 15—24 or eligible for a concession, plus resource fees and other fees that may apply to your course.

For more information click here

    CampusesBunbury. Albany.

    When Semester 1, 2024. Semester 2, 2024.

    Study Mode Full-Time.

    This qualification will provide you with practical skills and knowledge in a range of metals and engineering industry areas. You will learn skills in using tools, measuring and calculating, technical drawing and drafting, load shifting, thermal cutting, using forging and casting equipment, and welding. You will also learn about safety in the workplace, computing and mathematics. You will be able to practice the skills you have learned in a workshop environment when undertaking work placement.

    Important information

    Select your preferred campus and apply

    Semester 1, 2024

    Details

    Duration 1 Semester
    When Semester 1, 2024
    Where Albany
    How Pre-Apprenticeship - Classroom

    Course fees

    Indicative General fee $752.86
    (Tuition fee* $523.26 + Resource fee $229.60 )
    Indicative Concession fee $384.64
    (Tuition fee* $155.04 + Resource fee $229.60 )
    Indicative Fees and Charges

    The fees quoted are estimates only and are for all units in the course for students enrolling on a full-time basis. If you're a student that has successfully completed a lower-level qualification that is a prerequisite for this course, you'll only pay for the units that you need to enrol in to complete this course. Please view the full list of Fee Disclaimers

    Units

    Not all units and study modes are offered at all campuses. Please check with your local campus.

    National ID Unit title
    MEM15024A Apply quality procedures
    MEM16007A Work with others in a manufacturing, engineering or related environment
    MEM15002A Apply quality systems
    MEM14004A Plan to undertake a routine task
    MEM13014A Apply principles of occupational health and safety in the work environment
    National ID Unit title
    AW866 Module 1 (placement arranged)
    MEM12024A Perform computations
    MEM18001C Use hand tools
    MEM16008A Interact with computing technology
    MEM16006A Organise and communicate information
    MEM12023A Perform engineering measurements
    AW867 Module 2 (commenced)
    MEM11011B Undertake manual handling
    MEM09002B Interpret technical drawing
    MEM05050B Perform routine gas metal arc welding
    MEM05013C Perform manual production welding
    MEM05012C Perform routine manual metal arc welding
    MEM05007C Perform manual heating and thermal cutting
    MEM05005B Carry out mechanical cutting
    AW869 Module 4 (completed)
    AW868 Module 3 (mid-point)
    MEM18002B Use power tools/hand held operations

    Details

    Duration 1 Semester
    When Semester 1, 2024
    Where Bunbury
    How Pre-Apprenticeship - Classroom

    Course fees

    Indicative General fee $752.86
    (Tuition fee* $523.26 + Resource fee $229.60 )
    Indicative Concession fee $384.64
    (Tuition fee* $155.04 + Resource fee $229.60 )
    Indicative Fees and Charges

    The fees quoted are estimates only and are for all units in the course for students enrolling on a full-time basis. If you're a student that has successfully completed a lower-level qualification that is a prerequisite for this course, you'll only pay for the units that you need to enrol in to complete this course. Please view the full list of Fee Disclaimers

    Units

    Not all units and study modes are offered at all campuses. Please check with your local campus.

    National ID Unit title
    MEM16007A Work with others in a manufacturing, engineering or related environment
    MEM15024A Apply quality procedures
    MEM15002A Apply quality systems
    MEM14004A Plan to undertake a routine task
    MEM13014A Apply principles of occupational health and safety in the work environment
    National ID Unit title
    AW866 Module 1 (placement arranged)
    MEM12023A Perform engineering measurements
    MEM18002B Use power tools/hand held operations
    MEM18001C Use hand tools
    MEM16008A Interact with computing technology
    MEM16006A Organise and communicate information
    MEM12024A Perform computations
    MEM11011B Undertake manual handling
    AW867 Module 2 (commenced)
    MEM09002B Interpret technical drawing
    MEM05050B Perform routine gas metal arc welding
    MEM05049B Perform routine gas tungsten arc welding
    MEM05012C Perform routine manual metal arc welding
    MEM05007C Perform manual heating and thermal cutting
    MEM05005B Carry out mechanical cutting
    MEM05004C Perform routine oxy acetylene welding
    MEM03003B Perform sheet and plate assembly
    AW869 Module 4 (completed)
    AW868 Module 3 (mid-point)
    MSMENV272 Participate in environmentally sustainable work practices

    Semester 2, 2024

    Details

    Duration 1 Semester
    When Semester 2, 2024
    Where Albany
    How Pre-Apprenticeship - Classroom

    Course fees

    Indicative General fee $752.86
    (Tuition fee* $523.26 + Resource fee $229.60 )
    Indicative Concession fee $384.64
    (Tuition fee* $155.04 + Resource fee $229.60 )
    Indicative Fees and Charges

    The fees quoted are estimates only and are for all units in the course for students enrolling on a full-time basis. If you're a student that has successfully completed a lower-level qualification that is a prerequisite for this course, you'll only pay for the units that you need to enrol in to complete this course. Please view the full list of Fee Disclaimers

    Units

    Not all units and study modes are offered at all campuses. Please check with your local campus.

    National ID Unit title
    MEM15024A Apply quality procedures
    MEM16007A Work with others in a manufacturing, engineering or related environment
    MEM15002A Apply quality systems
    MEM14004A Plan to undertake a routine task
    MEM13014A Apply principles of occupational health and safety in the work environment
    National ID Unit title
    AW866 Module 1 (placement arranged)
    MEM12024A Perform computations
    MEM18001C Use hand tools
    MEM16008A Interact with computing technology
    MEM16006A Organise and communicate information
    MEM12023A Perform engineering measurements
    AW867 Module 2 (commenced)
    MEM11011B Undertake manual handling
    MEM09002B Interpret technical drawing
    MEM05050B Perform routine gas metal arc welding
    MEM05013C Perform manual production welding
    MEM05012C Perform routine manual metal arc welding
    MEM05007C Perform manual heating and thermal cutting
    MEM05005B Carry out mechanical cutting
    AW869 Module 4 (completed)
    AW868 Module 3 (mid-point)
    MEM18002B Use power tools/hand held operations

    Details

    Duration 1 Semester
    When Semester 2, 2024
    Where Bunbury
    How Pre-Apprenticeship - Classroom

    Course fees

    Indicative General fee $752.86
    (Tuition fee* $523.26 + Resource fee $229.60 )
    Indicative Concession fee $384.64
    (Tuition fee* $155.04 + Resource fee $229.60 )
    Indicative Fees and Charges

    The fees quoted are estimates only and are for all units in the course for students enrolling on a full-time basis. If you're a student that has successfully completed a lower-level qualification that is a prerequisite for this course, you'll only pay for the units that you need to enrol in to complete this course. Please view the full list of Fee Disclaimers

    Units

    Not all units and study modes are offered at all campuses. Please check with your local campus.

    National ID Unit title
    MEM16007A Work with others in a manufacturing, engineering or related environment
    MEM15024A Apply quality procedures
    MEM15002A Apply quality systems
    MEM14004A Plan to undertake a routine task
    MEM13014A Apply principles of occupational health and safety in the work environment
    National ID Unit title
    AW866 Module 1 (placement arranged)
    MEM12023A Perform engineering measurements
    MEM18002B Use power tools/hand held operations
    MEM18001C Use hand tools
    MEM16008A Interact with computing technology
    MEM16006A Organise and communicate information
    MEM12024A Perform computations
    MEM11011B Undertake manual handling
    AW867 Module 2 (commenced)
    MEM09002B Interpret technical drawing
    MEM05050B Perform routine gas metal arc welding
    MEM05049B Perform routine gas tungsten arc welding
    MEM05012C Perform routine manual metal arc welding
    MEM05007C Perform manual heating and thermal cutting
    MEM05005B Carry out mechanical cutting
    MEM05004C Perform routine oxy acetylene welding
    MEM03003B Perform sheet and plate assembly
    AW869 Module 4 (completed)
    AW868 Module 3 (mid-point)
    MSMENV272 Participate in environmentally sustainable work practices

    Get help

    Course enquiry form